Homepage of KONAN DESIGN INDUSTRIES Co., LTD

It is a machine that cuts and chamfers plastic pipes from 25 to 350A in outline. Automatically cuts long pipes into short pipes. The pipe is automatically supplied and the cut pipe is automatically discharged. Furthermore, automatic random scale cutting is also possible. You can select bite cutting that allows external chamfering at the same time as cutting, and chip-less disc and knife cutting.
Since the pipe is cut without rotating, the pipe will not be scratched.

Compatible with 3-inch and 6-inch pipes. Both ends can be chamfered at the same time as cutting. Since the cut chamfer is performed in one process, there is no damage to the product due to horizontal holding.
Since the pipe is cut without rotating, the pipe will not be scratched.

It is the most suitable machine for prefabricated construction method. If the pipe is set manually, planing of the end face, heating of the end face, and fusion can all be done automatically. It is also possible to fuse the joint socket and the pipe. The corresponding successor is Max200A.

The total length is up to 6m and the pipe outer diameter is MaxΦ300mm. It is a one-touch exchange type and uses a spray nozzle.

A machine that cuts thin-walled steel pipes such as roller conveyors into short outlines. Automatic supply of raw pipes, automatic discharge of cut pipes, and automatic random scale cutting are also possible. Since the thin-walled steel pipe is cut without rotating, the pipe will not be scratched.